100+ cases
REAL PATIENT STORIES

Before & After Treatment Cases

Take a closer look at the conditions patients come in with, the treatment approach selected by the doctor, and the final results achieved after treatment.
View case studies → Schedule a consultation
Before After Before-and-After Treatment Cases
Fixed same-day teeth

5 implants and a temporary fixed prosthesis on the day of surgery

Full restoration of the upper jaw

A permanent zirconia hybrid prosthesis in 5–6 months

Crown replacement
Problem

The patient presented with an unaesthetic ceramic crown in the smile zone, with excessive opacity, grayish tint, and poor shade integration.

Solution

Dr. Boris Lipovetskiy replaced the old crown with a high-aesthetic ceramic crown, individually matching color, hue, saturation, and translucency.

The new crown blended naturally with adjacent teeth in both studio and natural lighting, restoring seamless smile aesthetics.
Lower arch alignment
Problem

The patient presented with severe crowding of the lower arch, uneven smile aesthetics, excessive chewing pressure, and bite imbalance.

Solution

Dr. Boris Lipovetskiy developed a personalized orthodontic treatment plan using CT imaging and photographic analysis. Braces were placed to gradually and safely align the lower arch while improving overall bite function and smile balance.

Within several months, the lower teeth were aligned, the smile line improved, and chewing pressure resolved.
Zirconia
Problem

The patient presented with fractured upper teeth, compromised smile aesthetics, and reduced confidence in social interactions.

Solution

Dr. Boris Lipovetsky placed a custom zirconia bridge carefully matched to the shade of the patient’s natural teeth and existing restorations. The prosthetic anatomy was designed to closely replicate the appearance and contours of natural teeth.

The upper smile zone was restored with a natural, harmonious aesthetic result.
Ceramic onlay
Problem

The patient presented with a damaged tooth causing pain and chewing discomfort, with approximately one-third of the crown destroyed.

Solution

Dr. Lipovetskiy placed a ceramic onlay, as a traditional filling would not provide sufficient durability or marginal seal.

The tooth anatomy, strength, and function were restored while preserving a natural appearance.
Six ceramic crowns
Problem

The patient presented with darkened enamel, chipped anterior edges, uneven tooth alignment, and poor smile aesthetics.

Solution

The smile zone was restored with six custom ceramic crowns, correcting tooth edges, arch alignment, and shade.

The anterior teeth became straight, brighter, and stronger. Smile aesthetics and chewing function were restored.
Safe amalgam removal
Problem

The patient presented with an old mercury filling, tooth darkening, and sensitivity to hot and cold foods.

Solution

Dr. Boris Lipovetskiy performed safe amalgam removal under dental dam isolation, air purification, air-vacuum protection, and IAOMT standards. The tooth was cleaned and restored with a composite filling.

The restoration matched the natural enamel shade. Tooth sensitivity resolved, and smile aesthetics were restored.
Missing tooth bridge
Problem

The patient presented with a tooth missing for 5 years, causing chewing discomfort and compromised smile aesthetics.

Solution

Dr. Boris Lipovetskiy placed a bridge while preserving healthy tooth structure – one abutment tooth was fully prepared, and the second was partially prepared for overlay fixation.

Chewing comfort and smile aesthetics were restored. The bridge appeared natural and blended with adjacent teeth.
Single crown
Problem

The patient presented with a fractured anterior incisor affecting function and smile aesthetics.

Solution

Dr. Boris Lipovetskiy placed a single crown on the damaged tooth, matching its shape and color to the natural dentition. Bite correction was also recommended to prevent further issues.

The crown blended naturally with adjacent teeth, restoring aesthetics and tooth function.
Ceramic bridge
Problem

The patient presented with a temporary bridge, painful chewing, and inability to smile comfortably.

Solution

Dr. Boris Lipovetsky assessed the remaining teeth and root canal fillings, removed the old composite restoration, prepared the teeth, and placed a permanent ceramic bridge after temporary fixation.

Anterior tooth shape and symmetry were restored. Chewing comfort and smile aesthetics improved.
Snap-On veneers
Problem

The patient presented with unaesthetic yellow, uneven teeth and requested correction within a limited budget.

Solution

Dr. Lipovetskiy placed temporary Snap-On Smile veneers in one visit, correcting visible defects across the dental arch.

The patient now has a straighter, brighter, and more aesthetic smile.
Smile zone upgrade
Problem

The patient presented with aesthetic concerns related to tooth shape, shade, and visibility within the smile zone.

Solution

Comprehensive cosmetic dental treatment was performed to restore the shape, color, and overall proportions of the anterior teeth.

After treatment, tooth display was increased, the smile line was improved, and a more harmonious aesthetic result was achieved.
Smile symmetry
Problem

The patient presented with an aesthetic request to improve tooth shape, shade, and symmetry in the smile zone.

Solution

Comprehensive cosmetic dental treatment was performed to restore tooth proportions, shade, and the smile line.

After treatment, tooth display was improved, the anterior teeth were properly aligned, and a more balanced, harmonious smile aesthetic was achieved.
Anterior aesthetics
Problem

The patient presented with aesthetic concerns related to smile shape, symmetry, and overall fullness.

Solution

Comprehensive cosmetic dental treatment was performed to enhance tooth proportions, improve shade consistency, and refine the overall smile line.

After treatment, the smile appeared wider and more symmetrical, with improved tooth shape and enhanced anterior aesthetics.
Aesthetic crowns
Problem

The elderly patient presented with a fractured anterior tooth and advanced decay affecting nearly the entire dentition. The patient declined both extractions and root canal treatment.

Solution

A conservative, minimally invasive treatment approach was selected. All carious tissue was carefully removed while preserving tooth vitality and as much healthy structure as possible. The weakened teeth were then restored with durable, aesthetic crowns.

The smile zone was fully restored without extractions or root canals. Natural teeth were preserved, function was reinforced, and the final result provided stable aesthetics and comfort.
Fixed same-day teeth
Problem

The patient presented with non-restorable upper teeth and chronic gum inflammation, refusing removable dentures.

Solution

Immediate Load protocol was performed – damaged teeth were removed, five implants were placed, and a fixed temporary prosthesis was delivered the same day.

After 5–6 months, a permanent zirconia hybrid prosthesis was placed, restoring fixed function, natural aesthetics, and confident chewing.
Dental Implants
Problem

The patient presented with pain and discomfort caused by root canal infection in two teeth.

Solution

Both affected teeth were extracted, zirconia implants were placed, and two crowns were fabricated and secured.

The implants integrated without complications. Function was restored, and the crowns achieved a natural aesthetic result.
Bone grafting + implant
Problem

The patient presented with a long-missing upper anterior tooth, severe bone loss, and gum recession.

Solution

Dr. Boris Lipovetskiy performed bone grafting, placed a dental implant, and restored it with a crown matched to adjacent teeth in color and shape.

Smile aesthetics, speech confidence, chewing comfort, and full masticatory function were restored.
Same-day prosthesis
Problem

The patient presented with multiple missing teeth, impaired chewing, poor smile aesthetics, TMJ problems, neck tension, and anterior tooth decay due to loss of posterior support.

Solution

Dr. Boris Lipovetskiy performed full upper reconstruction with a fixed implant-supported hybrid denture, including extractions, implant placement, and same-day fixed prosthesis.

Normal occlusion, chewing function, and natural smile aesthetics were restored.
Z-System implant
Problem

The patient presented with severe molar pain caused by root canal infection.

Solution

The molar was extracted. After 4 months, surgeon-implantologist Christian Rouleau placed a zirconia Z-System implant, followed by restoration with a zirconia crown by Dr. Lipovetskiy.

After 3 months, the implant fully integrated. Soft tissue adaptation was favorable, and the smile was restored with a natural aesthetic result.
Front implants
Problem

The patient presented with loss of anterior incisors in the smile zone.

Solution

Two anterior incisors were removed under anesthesia, and Infinity Dental Implant Systems were placed. Temporary Snap-On Smile removable veneers were fitted, then replaced with permanent zirconia crowns after 5 months of implant engraftment.

The zirconia crowns matched the adjacent teeth in color and proportion, restoring a natural, stable smile.
Implant restoration
Problem

The patient presented with a defect in the upper anterior region, including loss of coronal tooth structure and compromised smile aesthetics.

Solution

Implant placement was followed by prosthetic restoration to recreate the crown’s shape, shade, and position.

After treatment, dental arch continuity was restored, the smile line improved, and a natural aesthetic result was achieved.
Implant-supported crown
Problem

The patient presented with a defect in the upper anterior region – loss of the clinical crown, an implant already in place, and compromised smile aesthetics.

Solution

Implant-supported restoration was completed to restore the tooth’s anatomical shape, shade, and position within the smile line.

After treatment, anterior dental arch continuity was restored, the defect was closed, and a natural smile aesthetic was achieved.
Immediate crown loading
Problem

The patient presented with a missing tooth, with only the residual root remaining in the gum.

Solution

The remaining root was removed, an implant was placed in the missing tooth area, and immediate crown loading was performed.

Dental arch integrity was restored without prolonged waiting. The implant crown matched the adjacent teeth in color and shape, providing a natural aesthetic result.
Implant repair
Problem

The patient presented with a rare complication – fracture through the body of an implant supporting a restoration in the aesthetic zone.

Solution

Instead of traumatic removal, prolonged healing, bone grafting, and new implant placement, the stable implant fragment was preserved. The internal part of the remaining implant was prepared, a custom abutment was fabricated, and a new crown was placed with precise color and shape matching.

The dental arch continuity and chewing function were restored within weeks. The crown integrated naturally with the surrounding teeth, the gingival contour was preserved, and major surgical retreatment was avoided.
Upper arch rebuild
Problem

The patient presented with few remaining upper teeth, severe mobility and damage, impaired chewing, and poor smile aesthetics

Solution

Damaged teeth were removed, and the upper arch was restored with a fixed hybrid bridge supported by five dental implants.

Chewing function was restored. The patient received a stable, natural-looking smile with simple daily hygiene and long-term prosthetic support.
Pain-free chewing
Problem

The patient presented with severely damaged teeth, deep cavities, cracks, teeth destroyed to the roots, collapsed bite, painful chewing, and poor smile aesthetics.

Solution

Staged full-mouth reconstruction was performed – non-restorable teeth were removed, viable teeth preserved, bite rebuilt, and custom prosthetics placed. Upper arch is complete; lower arch is in progress.

Chewing became comfortable and pain-free. The smile was restored with a natural aesthetic result.
Full dental restoration with implants
Problem

The patient presented with complete tooth loss in both jaws, affecting chewing function, bite stability, and smile aesthetics.

Solution

Implants were placed in the lower jaw and restored with a full hybrid denture. A full removable denture was fabricated for the upper jaw to restore aesthetics and balanced function.

Chewing function, bite support, and smile aesthetics were restored. The final result provided a natural-looking appearance and long-term prosthetic stability.
Crown replacement
Problem

The patient presented with severe tooth wear, altered incisor shape and inclination, multiple metal crowns, gum irritation, pain, bleeding, and poor smile aesthetics.

Solution

Dr. Boris Lipovetskiy performed full-mouth reconstruction – bite opening, oral sanitation, replacement of old crowns, and restoration of tooth anatomy and bite height.

Pain and gingival inflammation resolved. The teeth became even and white, facial proportions improved, and the smile was fully restored.
TMJ improvement
Problem

The patient presented with a medium deep bite, severe wear of the mandibular teeth, increased tooth sensitivity, TMJ dysfunction, headaches, neck pain, and dizziness.

Solution

Dr. Boris Lipovetskiy restored the bite in two stages – first repositioning the lower jaw into a physiological position, then preparing the lower teeth for crown placement after 1–2 months.

TMJ function improved, headaches, neck pain, and dizziness resolved, and tooth sensitivity decreased. The smile became more aesthetic, sleep improved, and nighttime teeth grinding stopped.
Zirconia reconstruction
Problem

The patient presented with worn mandibular teeth, multiple missing teeth, facial asymmetry, uneven smile, deepened perioral wrinkles, TMJ dysfunction, headaches, back pain, dizziness, and dry mouth.

Solution

Dr. Boris Lipovetskiy performed full mouth reconstruction with zirconia implants and crowns, raising the lower dental arch. Treatment followed a holistic protocol without metal or root canals.

Bite height increased, TMJ function was restored, and associated symptoms resolved. Facial symmetry improved, the mouth line became more balanced, and perioral wrinkles softened.
Partial denture
Problem

The patient presented with a fractured bridge prosthesis, difficulty eating and speaking, missing teeth, and poor smile aesthetics.

Solution

Dr. Boris Lipovetskiy performed examination of the teeth and gums, took an impression of the upper dental arch, and fabricated a removable partial denture with crowns, gum imitation, and custom clasps anchored to adjacent teeth.

Chewing and speech function were restored. The prosthesis appeared natural and was not visible externally.
Failed crowns replaced
Problem

The patient presented with bruxism and failed crowns and implant-supported bridges from another clinic, with recurrent fractures, debonding, misaligned bite, and poor aesthetics on short teeth.

Solution

Dr. Boris Lipovetskiy performed examination and bite analysis. New zirconia crowns and implant-supported bridges were placed with corrected load distribution; a night guard was fabricated.

The restorations became stable and durable. Chewing comfort improved, bruxism load was controlled, and smile aesthetics were restored.
Bite correction
Problem

The patient presented with malocclusion, irregular tooth shape, impaired chewing function, frequent headaches, and discomfort during chewing.

Solution

Dr. Boris Lipovetskiy performed examination and bite analysis. Orthodontic treatment was prescribed, followed by crowns and veneers to improve tooth form, smile aesthetics, and occlusal balance.

The bite was corrected, chewing comfort improved, headaches resolved, and the smile became more natural, balanced, and symmetrical.
Full-mouth rebuild
Problem

The patient presented with significant aesthetic and functional concerns, including multiple coronal defects, tooth discoloration, reduced tooth display, and impaired occlusion.

Solution

A full mouth reconstruction was completed to restore tooth shape, shade, vertical dimension, and functional contacts.

After treatment, dental arch integrity was restored, the smile line was improved, tooth display increased, and a more stable bite aesthetic was achieved.
Bite aesthetics
Problem

The patient presented with significantly reduced smile aesthetics, limited tooth display, and compromised tooth shape, shade, and proportions.

Solution

A full mouth reconstruction was completed to restore anatomical tooth shape, shade, vertical dimension, and occlusal relationships.

After treatment, tooth display was increased, dental arch integrity was restored, the smile line was improved, and a more harmonious bite aesthetic was achieved.
Bite harmony
Problem

The patient presented with concerns about reduced smile aesthetics, uneven tooth display, and altered shape and proportions of the anterior teeth.

Solution

A full mouth reconstruction was completed to restore tooth shape, shade, vertical dimension, and occlusal relationships.

After treatment, the smile line was improved, tooth display increased, and more harmonious proportions and overall bite aesthetics were restored.
Tooth shape restored
Problem

The patient presented with concerns about reduced smile aesthetics, limited tooth display, and altered tooth shape and proportions.

Solution

A full mouth reconstruction was completed to restore tooth shape, shade, vertical dimension, and occlusal relationships.

After treatment, tooth display was improved, the smile line was enhanced, and overall functional and aesthetic harmony was restored.
Severe wear repair
Problem

The patient presented with severe pathological tooth wear affecting almost the entire dentition, with mandibular teeth worn nearly to the gingival level, loss of bite height, impaired chewing function, and risk of TMJ overload.

Solution

Full-mouth rehabilitation was performed – complete tooth reconstruction, restoration of vertical dimension, bite stabilization, and chewing function. Years later, after an anterior tooth fracture, the tooth was rebuilt with precise shade integration, matching shape, texture, translucency, and incisal edge anatomy.

The repair blended seamlessly into the existing reconstruction. The smile was restored to its previous aesthetic and functional condition, with natural appearance, comfort, and long-term stability.
KöR whitening
Problem

The patient presented with naturally dark enamel shade A3, aggravated by staining foods and daily coffee consumption, with a request for a brighter but natural-looking smile.

Solution

Dr. Boris Lipovetskiy performed KöR Deep Bleaching using the American KöR Whitening system, with careful gum isolation and a protocol adjusted to the patient’s sensitivity level.

The enamel shade improved to Bleach Shade B1. The teeth became 6 shades whiter, with a brighter, fresher, and natural aesthetic result.
Yellow tone correction
Problem

The patient presented with concerns about an unsatisfactory tooth shade, including a pronounced yellow tone and reduced smile aesthetics.

Solution

Professional teeth whitening was performed with shade monitoring and soft tissue protection.

After treatment, the enamel appeared noticeably lighter, giving the smile a cleaner, brighter, and more aesthetic appearance.
Even enamel shade
Problem

The patient presented with pronounced tooth discoloration and a dark yellow enamel shade in the smile zone.

Solution

Professional teeth whitening was performed with prior soft tissue isolation and shade monitoring.

After the procedure, significant enamel lightening was achieved, with improved color uniformity and overall smile aesthetics.
Chip repair
Problem

The patient presented with chipped anterior teeth and a visible diastema, causing uneven smile aesthetics.

Solution

Esthetic reconstruction was performed with veneers. The tooth edges were reshaped, the gap was closed, and the veneer shade was matched to a natural tooth color.

The anterior teeth were restored to a balanced appearance. The diastema was closed, chips were masked, and the smile became even and natural-looking.
Ceramic veneers
Problem

The patient presented with disproportionate anterior teeth that appeared short and square, affecting smile aesthetics.

Solution

Laser gum contouring was performed to reshape the gingival line and visually lengthen the teeth. Ceramic veneers were then placed to improve tooth shape, proportions, and overall smile aesthetics.

The anterior teeth became more harmonious in length and form. The smile was restored with balanced gingival contours and improved aesthetic proportions.
Zirconia veneers
Problem

The patient presented with aesthetic concerns due to yellowish tooth discoloration, white spots, worn incisal edges, uneven tooth shape, and increased sensitivity during eating.

Solution

After diagnostic evaluation by Dr. Boris Lipovetsky, zirconia veneers were placed. A thin enamel layer was removed, and veneers with a natural shade and anatomically correct shape were bonded.

The teeth regained a natural color, balanced shape, and comfortable function. Sensitivity was reduced, and the patient achieved a more confident, harmonious smile.
Fractured tooth repair
Problem

The patient presented with a fractured lower lateral incisor requiring aesthetic restoration.

Solution

Dr. Boris Lipovetskiy examined the damaged tooth, placed a temporary restoration, and fixed a permanent veneer within 5–7 days, matching it precisely in color and shape.

The tooth was restored with a veneer that blended naturally with the surrounding dentition. Aesthetic integrity and tooth appearance were fully restored.
Shape correction
Problem

The patient presented with aesthetic concerns in the upper dentition – slightly worn anterior incisors, enamel yellowing, and unsatisfactory tooth appearance.

Solution

Dr. Boris Lipovetskiy performed aesthetic restoration with 10 e-max veneers. The upper teeth were prepared, and the veneers were fixed to improve shape, color, and smile harmony.

The restorations masked pigmentation and shape defects. The smile became brighter, more even, and aesthetically balanced.
Ceramic veneers
Problem

The patient presented with poor smile aesthetics due to tooth darkening, yellowish discoloration, worn incisal edges, and visually small, uneven teeth.

Solution

After diagnostic evaluation, Dr. Boris Lipovetskiy planned ceramic veneers. The shade was selected for a natural appearance, and the veneer shape was designed in the in-house dental laboratory before final fixation.

The teeth regained a lighter shade, correct proportions, and an even incisal line. The smile became straight, balanced, and aesthetically restored
Proportion correction
Problem

The patient presented with poor smile aesthetics due to tooth darkening, yellowish discoloration, worn incisal edges, and visually small, uneven teeth.

Solution

After diagnostic evaluation, Dr. Boris Lipovetskiy planned ceramic veneers. The shade was selected for a natural appearance, and the veneer shape was designed in the in-house dental laboratory before final fixation.

The teeth regained a lighter shade, correct proportions, and an even incisal line. The smile became straight, balanced, and aesthetically restored.
Zirconium veneers
Problem

The patient presented with aesthetic concerns due to yellowish tooth discoloration and worn incisal edges, with a request for veneer-based smile restoration.

Solution

After diagnostic evaluation, Dr. Boris Lipovetskiy selected a natural veneer shade and anatomically correct shape. Zirconium veneers were then placed to restore tooth color, form, and smile aesthetics.

The teeth regained a brighter, healthier appearance with improved incisal anatomy. The smile became more balanced, natural-looking, and aesthetically restored.
Bite adjustment
Problem

The patient requested replacement of old upper veneers, correction of anterior tooth inclination, and bite adjustment without orthodontic treatment.

Solution

Dr. Boris Lipovetskiy performed diagnostics, modeled the future dental arch, removed the old veneers, completed sanitation, and placed custom ceramic veneers one week later.

Smile aesthetics improved, the bite was adjusted, and symmetry of the upper dentition was restored.
Smooth incisal edge
Problem

The patient presented with aesthetic concerns related to tooth discoloration, irregular shape, and an uneven incisal edge of the upper anterior teeth.

Solution

Veneers were placed in the upper anterior segment to correct tooth shape, shade, and proportions.

After treatment, smile symmetry was restored, tooth color was improved, and a smooth, aesthetic incisal edge was achieved.
Smile zone veneers
Problem

The patient presented with aesthetic concerns related to unsatisfactory tooth shade, shape, and surface irregularities in the upper anterior teeth.

Solution

Veneers were placed in the smile zone to improve the shade, shape, and visual proportions of the teeth.

After treatment, the dental arch appeared more even, tooth brightness improved, and a more harmonious smile aesthetic was achieved.
Restoration replacement
Problem

The patient presented with aesthetic concerns involving the upper anterior teeth, including an altered shade, bulky contours, and signs of a previous restoration that compromised the natural tooth proportions.

Solution

The existing esthetic restorations were replaced with veneers to improve shade, shape, and the incisal edge profile.

After treatment, the natural tooth proportions were restored, the smile appeared brighter, and the anterior segment achieved a more even and harmonious appearance.
Old restoration upgrade
Problem

The patient presented with aesthetic concerns related to the shape and proportions of the upper anterior teeth, as well as an unnatural appearance of previous restorations.

Solution

The existing restorations were replaced with veneers to improve tooth shape, shade, symmetry, and the incisal edge profile.

After treatment, the tooth proportions were improved, the anterior segment was aligned, and a more natural, harmonious smile aesthetic was achieved.
Anterior veneers
Problem

The patient presented with significant aesthetic defects of the upper anterior teeth, including discoloration, incisal edge chipping, and shape irregularities after pre-restorative treatment.

Solution

Veneers were placed in the anterior segment to restore tooth color, anatomical shape, volume, and the incisal edge contour.

After treatment, tooth integrity was restored, the proportions of the anterior teeth were improved, and a lighter, more harmonious smile aesthetic was achieved.
Veneer makeover
Problem

The patient presented with aesthetic concerns related to the shape, shade, and asymmetry of the upper anterior teeth, as well as spacing in the smile zone.

Solution

Veneers were placed in the anterior segment to improve tooth color, shape, width, and the incisal edge contour.

After treatment, the interdental spaces were closed, tooth proportions were balanced, and a brighter, more harmonious smile was achieved.
Bite correction
Problem

The patient presented with aesthetic concerns and functional discomfort caused by a deep bite, with significant overlap of the upper teeth over the lower teeth, enamel wear, and constant jaw tension.

Solution

Orthodontic treatment was performed with Invisalign® clear aligners. A 3D scan was taken, the final result was digitally modeled, and the patient changed aligners every 7–10 days without food restrictions or hygiene difficulties.

The deep bite was corrected. The lower teeth became visible when smiling, jaw tension resolved, and further pathological tooth wear was stopped.
Invisalign transformation
Problem

The patient presented with severe anterior crowding, deep bite, complete overlap of the upper incisors over the lower teeth, a visually compressed smile, and discomfort during chewing.

Solution

A full digital scan and 3D setup were performed to plan tooth movement with Invisalign® clear aligners. Treatment stages and timelines were calculated in advance; the patient changed aligners every 10 days with regular photo monitoring and check-ups.

After 9 months, the teeth were aligned into a stable arch, gaps closed, the deep bite was corrected, chewing discomfort resolved, and speech clarity improved. The patient noted early aesthetic improvement within the first 3 months.
Lumineer + Invisalign
Problem

The patient presented with an uneven smile due to one upper anterior tooth positioned noticeably behind the dental arch, with associated chewing discomfort.

Solution

For immediate aesthetic correction, a Lumineer ultra-thin veneer was bonded to bring the tooth into visual alignment. Comprehensive bite correction was then performed with Invisalign® aligners to gradually reposition the dentition.

The smile appeared straighter immediately after veneer placement. After completion of Invisalign® treatment, the bite was corrected, chewing comfort was restored, and the smile became naturally even and balanced.
Bruxism relief
Problem

The patient presented with pronounced malocclusion affecting smile aesthetics, accompanied by sleep disturbance and bruxism.

Solution

Orthodontic treatment was performed with Invisalign® aligners. A customized series of trays was fabricated to gradually move the teeth into correct positions and improve occlusion.

After 18 months, the bite was significantly corrected, bruxism stopped, and sleep complaints resolved. Smile aesthetics and jaw function were restored.
Front teeth alignment
Problem

The male patient presented with malalignment of the anterior teeth, crowding, and an uneven smile line.

Solution

Orthodontic treatment was completed with Invisalign®, using sequential aligners to gradually correct tooth position.

After treatment, the dental arches were aligned, the anterior segment was improved, and the smile became more balanced and aesthetically harmonious.
Longer-looking teeth
Problem

The patient presented with dissatisfaction with her smile due to short-looking anterior teeth, uneven gingival contour, and excess gum tissue partially covering the crowns.

Solution

Laser gum contouring was performed to remove excess soft tissue and reshape the gum line. The procedure was completed atraumatically, without bleeding, sutures, or significant discomfort.

An even gingival contour was achieved immediately. The anterior teeth appeared longer and more proportionate, creating a more balanced, natural-looking smile with minimal recovery time.
Gumline reshaping
Problem

The patient presented with an aesthetic concern involving short-looking upper anterior teeth and an uneven gingival contour in the smile zone.

Solution

Laser gingival contouring was performed to remove excess soft tissue and create a more symmetrical gumline.

After the procedure, the visible crown height increased, the gingival contour was evened out, and the smile became more open and balanced.

Book An Appointment Today

Call Us
954-525-5662